Introduction; Specifications; Capacities; Drive Mechanism - Ametek CHATILLON MT Série Manuel D'utilisation

1.0 INTRODUCTION

The CHATILLON MT test stand is designed to perform various tension or compression tests
utilizing the full range of CHATILLON force gauges. The MT test stand has two available
capacities 150 LBF (660 N) and 500 LBF (2.2 KN). Each capacity has a quick-action lever or
precision hand-wheel operating mechanism available. The MT test stand can be positioned
vertically and mounted to a bench or wall mounted. The MT test stand can also be horizon-
tally mounted and fastened to a bench. The wall mounting and horizontal mounting utilize
the same components. The MT column comes in three selectable heights 750mm, 1000mm
and 1500mm to accommodate various test sample heights. A ruler assembly is available for
measurements that require minimal travel accuracy. A digital indicator is available for mea-
surements that require accurate travel measurements. The MT test stand is lightweight and
modular in design. The MT test stand comes with standard accessories that will allow many
CHATILLON and LLOYD grips and fixtures to adapt to the test stand.
2.0 SPECIFICATION

2.1 Capacities

2.2 Drive Mechanism

2.3 Travel Rate

2.4 Total Column Length

2.5 Stroke

2.6 Throat Depth

2.7 MT Weight

3.0 ASSEMBLY AND SPARE PARTS LIST

3.1 Bench/Wall Mounting

Place MT test stand on a firm, flat level work surface that is free from vibration to ensure
accurate readings. It is recommended that the MT test stand is vertically mounted to a
work bench utilizing the four Ø8 mm (Ø.31 in) holes in the base. For horizontal or wall
mounting there are four Ø8.5mm (Ø.33 in) holes in two mounting plates that are used for
mounting the MT test stand to a bench or wall.
4
MT Series User Manual
150 LBF (660 N)
500 LBF (2.2 KN)
Quick-Action Lever
Precision Hand-Wheel
Quick-Action Lever – 75 mm (3 in) per Rev
Precision Hand-Wheel – 12 mm (0.5 in) per Rev
Standard – 750 mm (29.5 in)
Extended – 1000 mm (39.4 in)
Ultra – 1500 mm (59.1 in)
150 mm (6 in)
150 mm (6 in)
12.2 KG (26 LB) approx. weight