Daily Use - Zanussi ZEI6840FBA Notice D'utilisation

Heat setting displays
Display
-
Residual heat indicator
Warning! The risk of burns from
residual heat!

Daily use

Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). Remove the object or
clean the control panel.
• The appliance become too hot (e.g. when, a
saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be cool.
• You use not correct cookware. The symbol
comes on and the cooking zone deacti-
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deactivates. See
below.
20
The cooking zone is deactivated.
The cooking zone operates.
The Lock / The Child Safety Device operates.
The Power function operates.
The cookware is incorrect or too small, or there is no cookware on the cook-
ing zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Automatic Switch Off operates.
.
Description
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from the
heat of the cookware.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The cooking zone selection
To set the cooking zone touch the sensor field
related to this zone. The display highlights
the heat setting indication (
The heat setting
Set the cooking zone. Touch
heat setting. Touch
setting. The display shows the heat setting.
Touch and at the same time to deactivate
the cooking zone.
Power function
The Power function makes more power availa-
ble to the induction cooking zones (see "Cook-
ing zones power" table in the "Technical Infor-
mation" chapter). You can activate the Power
function for maximum 10 minutes. After that the
).
to increase the
to decrease the heat
www.zanussi.com