Securing The Door Stopper, Door Magnet; Attaching The Cabinet Door Handles; Mounting The Cabinet Doors To The Cart - Pit Boss SPORTSMAN PB1000SP Guide De Montage

5. SECURING THE DOOR STOPPER, DOOR MAGNET

Parts Required:
1 x Door Stopper (#28)
1 x Door Magnet (#27)
Screw (#D)
2 x
Installation:
• Remove the two pre-installed screws in the center of the bottom
shelf. Secure the door stopper to the same area using the two screws,
with the raised stop facing the back of the cart.
• Directly above, mount the door magnet using two screws. Ensure the
raised magnet is facing the front of the cart.

6. ATTACHING THE CABINET DOOR HANDLES

Parts Required:
2 x Cabinet Door Handle (#29)
4 x Cabinet Door Bezel (#30)
2 x Cabinet Door (#31 & #32)
Installation:
• Remove the pre-installed screws from the cabinet door handle. From
the rear of the cabinet door, insert one screw so that it protrudes to the
front. Add a cabinet door bezel on the screw, then hand-tighten the
screw (from the rear) into the cabinet door handle. Continue to secure
the handle by inserting a screw into the other side and tightening.
• Repeat same installation for second cabinet door handle.

7. MOUNTING THE CABINET DOORS TO THE CART

Installation:
• Align the left cabinet door with the front of the cart. Insert the bottom
pin into the pivot hole on the left side of the bottom shelf, then push
down on the locking-loaded top pin, and lock into the hole on the
main barrel brace.
IMPORTANT: The cabinet door should swing freely once installed, and
line up with the door stopper and door magnet. If unlevel, ensure
the top and bottom pins of the cabinet door are inserted correctly.
• Repeat same installation for second cabinet door on the right side.
5
27
28
6
31 32
30
29
30
7
8