Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
:
Push hand guard (1) forward:
The chain is now locked.
:
Press down the trigger interlock (2)
and squeeze the throttle trigger (3)
at the same time – hold both levers
in that position.
:
Move Master Control (4) to n and
hold it there.
:
Now release the throttle trigger,
Master Control and trigger interlock
in that order. This is the starting
throttle position.
MS 192 T
If engine is cold
:
Set the choke lever (5) to l
If engine is warm
:
Set the choke lever (5) to j.
Also use this position if the engine
has been running but is still cold.
:
Place your saw on the ground.
:
Make sure you have a firm footing –
check that chain is not touching any
object or the ground.
Bystanders must be well clear of the
general work area of the saw.
:
Hold the saw firmly on the ground
with your right hand on the top
handle and your right knee resting
on the carburetor box cover.
English
27
Hide quick links:
Publicité
Chapitres
Table des Matières
