Introduction; Symbols Used In This Manual - Mettler Toledo W100 Manuel D'instruction

W100 (Cableless Solution for ISM)
1

Introduction

Congratulations!
You have chosen a Mettler Toledo product.
The W100 is a quality product from one of the leading manufacturers of analyti-
cal instruments.
The W100 is the cableless solution for ISM
sensors for the measurement of pH, conductivity and with amperometric oxygen
sensors. With the W100 measured values can be transmitted between ISM
sensors and the transmitters M300 ISM or M400 with no need for costly cable
installation. All ISM specific real-time diagnostics information is wirelessly
transmitted to the field device, and available to the user for efficient maintenance
operation.
In many applications where the transmitter is not necessarily installed near the
sensor, this solution offers lower cost of ownership combined with best sensor
performance. The W100 is suitable in applications for biotechnology, food and
beverage, wastewater and pulp & paper. The LEDs on the sensor module and
the transmitter module indicate the status of the W100 at a glance.
2

Symbols used in this manual

CAUTION: Possible instrument damage or malfunction.
C
NOTE: Important operating information.
LED is flashing.
© 05/09 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland
(Intelligent Sensor Management)
®
W100 (Cableless Solution for ISM)
5
52 003 761