Wiring; Pairing / Bring In Operation - Mettler Toledo W100 Manuel D'instruction

W100 (Cableless Solution for ISM)
5

Wiring

TB4 –
Transmitter Pin no.
1
2
3
4
5
6
7
8
9
* Yellow and green are not connected.
6

Pairing / Bring in operation

Place sensor module and transmitter module within a distance of 0.50 meter
(19.69 inches).
© 05/09 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland
Wire color* transmitter module
–
–
Red
Orange
–
Brown and green / yellow
–
–
Black
Press the button of the sensor module 3 seconds.
The green LED is rapidly flashing and indicates the
W100
searching of the transmitter module.
After receiving a transmitter module the green LED of
the sensor module is flashing with one blink per second.
W100
At the transmitter module a successful pairing will be
indicated by shining of a LED for two minutes. Then
the LED of the transmitter module is flashing as well with
one blink per second.
Function
Not used
Not used
1-Wire
GND (5 VDC)
Not used
GND (5 VDC)
Not used
Not used
5 VDC
W100 (Cableless Solution for ISM)
10
52 003 761