Cleaning - Petsafe Simply Clean Manuel D'utilisation

Wash your hands after handling used cat litter and waste bin.

Cleaning

Routine general cleaning is recommended and necessary to keep the Simply Clean
high level of performance. We recommend cleaning the system every two weeks for a single cat household.
1. Unplug the power adapter from the wall outlet and disconnect it from the litter box.
2. Remove the waste bin and dispose of any waste.
3
3. Remove the conveyor cover by lifting up on the sides.
5
5. Lift up the litter bowl to remove it, and dispose of
used litter.
7. Rinse and thoroughly dry all parts before reassembling the unit. If needed, carefully clean the conveyor using only a
damp cloth or sponge.
DO NOT submerge or expose the base unit, conveyor or any electrical components to water or
cleaning solutions. DO NOT use bleach or chemicals to clean as they can act as a repellent to your cat.
8 8
4
4. Remove the thumb screws from center of the litter bowl
and top of the conveyor. Lift the conveyor to its upright
position.
6
6. If further cleaning is needed, remove the litter guard by
gently pulling up the tabs on the bottom of clips and the
tab at end of the guard. The litter bowl, litter guard and
waste bin can be submerged in water and washed with
mild soap.
Customer Care Center 1-800-732-2677
Automatic Litter Box operating at a
®