Petsafe Simply Clean Manuel D'utilisation page 6

5
5. Align the holes on the underside of the conveyor cover
with posts and screws on the conveyor. Push the cover
into place.
7
7. Fill the litter bowl only with clumping, scoopable, clay
cat litter to the fill line.
NOTE
The conveyor cover and waste bin must be aligned correctly and fully inserted in unit to turn
on green indicator light. Green light must be on to supply power for the litter box to operate properly.
Only use clumping, scoopable, clay cat litter. Using a different type can cause the litter box to malfunction.
Do not let litter level fall below the fill line or the litter box may not operate properly.
Do not allow anything to rest on the power cord. Do not plug in power adaptor in an area where
people or animals may walk or trip on cord.
6 6
6
6. Use a plastic bag to line the waste bin. Insert the waste
bin into the back of the litter box, making sure it is
aligned and fully inserted into the unit.
For additional help to minimize odors, add a small layer
of clean litter and baking soda to the plastic waste bag
or waste bin before placing it in the litter box.
8
Litter Level
Fill Line
8. Insert the end of the power adapter into the power
connection on the back of the litter box. Plug it into a
standard wall outlet. The green light on the litter box
should illuminate. Your litter box is ready for use.
Customer Care Center 1-800-732-2677
Adapter to
Wall Outlet
Green Indicator Light