Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DD-CR1 drill stand
It is essential that the operating
instructions are read before the
equipment is operated for the first
time.
Always keep these operating instruc-
tions together with the equipment.
Ensure that the operating instruc-
tions are with the equipment when
it is given to other persons.
Operating controls
and components
End caps
Stop screws
Securing knob
Lockbutton
Carriage
Columns
Depth gauge
Locking lever
Vacuum connection
Vacuum release valve
Grip
Leveling screws
Vacuum seal
Baseplate
Pressure gauge
Adjustable plate
Lever
Hose strain relief
Contents
1. General information
12. Declaration of conformity
Printed: 07.07.2013 | Doc-Nr: PUB / 5069650 / 000 / 00
1. General information
1.1 Indication of danger
-WARNING-
The word WARNING is used to draw attention to a poten-
tially dangerous situation which could lead to severe
personal injury or death.
-CAUTION-
The word CAUTION is used to draw attention to a potentially
dangerous situation which could lead to minor person-
al injury or damage to the equipment or other property.
-NOTE-
The word NOTE is used to draw attention to an instruc-
tion or other useful information.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear a safety
helmet
Symbols
On the drill stand:
Page
7
8
8
8
8
Upper part: An additional
9
means of securing the drill
11
stand must be employed
when used for horizontal
11
drilling with vacuum attach-
ment.
11
11
Lower part: The drill stand
must be fastened by means of
12
an anchor or quick-release
brace when used for overhead
See cover
drilling.
Symbols
Warning:
Read the operating instructions for
electricity
the DD-CR1 and DD EC-1 before use.
Wear eye
Wear
Wear safety
protection
protective
gloves
On the tool:
VACUUM
VACUUM
Use of the water collector system in
conjunction with the DD-REC1 or a
wet-type vacuum cleaner is mandatory
when working overhead on ceilings.
Wear
boots
protective
clothing
7
Publicité
Chapitres
Table des Matières
Dépannage
