Sherwood RD-5405 Mode D'emploi page 12

RD-5405(G)100316_RD-5503(g) 2010-04-20 오후 7:57 페이지 12
When VIDEO 1, VIDEO 2 is selected as an input source
3.
Select the digital or the analog input connected as
desired.
• Each time this button is pressed, the corresponding input
is selected as follows:
→ o(ptical) → c(oaxial) → A(nalog)
■Notes :
• When TUNER, TAPE or CD is selected as an input source,
the digital input cannot be selected.
• When the selected digital input is not connected, the
"DIGITAL" indicator flickers and the analog input is
automatically selected.
• The selected digital or analog input is automatically
assigned to the corresponding input source on the INPUT
setup menu. (For details, refer to "SETTING THE INPUT "
on page 31.)
• The sound from the component connected to the selected
digital input can be heard regardless of the selected input
source.
4.
Operate the selected component for playback.
• When playing back the program sources with surround
sound, refer to "ENJOYING SURROUND SOUND" on
page 15.
5.
Adjust the (overall) volume.
6.
To mute the sound.
• "MUTE" will flicker.
• To resume the previous sound level, press it again.
12