Local Rfid Cards Management - Mennekes AMTRON Xtra Manuel D'utilisation

5.2 Local RFID cards management

For RFID authorization, prior once-off registration of the
user's RFID card is required. The device can manage up to
100 RFID cards (2x master, 98x users) in an internal data-
base (whitelist).
There are the following two ways of managing the RFID
card:
„ Without MENNEKES Charge APP:
The operator of the device is authorised by his master
RFID card to add new RFID cards to the internal data-
base.
„ With MENNEKES Charge APP:
In conjunction with MENNEKES Charge APP, the
whitelist is particularly convenient for RFID authorisa-
tion. In addition, names can be assigned to RFID cards,
RFID cards can be deleted, and the whitelist can be
transferred to other devices.
The master RFID cards cannot authorize charging
processes.
The device necessarily requires two RFID cards
taught as masters.
If a card taught as master is deleted with the
MENNEKES Charge APP, the next unknown RFID
card held against the RFID card reader will be
taught as master.
Without MENNEKES Charge APP
Adding a new RFID card:
f Hold the master RFID card in front of the RFID card
reader to activate the teach-in mode.
f Hold the RFID card to be taught in front of the RFID
card reader within 30 seconds.
f If necessary, hold another RFID card to be taught in
front of the RFID card reader.
f Hold the master RFID card in front of the RFID card
reader to exit the teach-in mode.
RFID card(s) has been added to the whitelist.
9
If during teach-in mode for an RFID card the sym-
bol lights up permanently, the whitelist is full
and no more RFID cards can be added.
With MENNEKES Charge APP
f Navigate to "Manage RFID cards"
f Enter PIN2 (whitelist PIN).
A list of all RFID cards appears.
9
Adding a new RFID card:
f Click on "+" to add new RFID cards.
f Enter the desired name and number of the RFID cards.
If the number of the RFID card is not known, it can be read
out via a card reader.
Deleting an RFID card:
f Click on the "Settings" icon.
f In "Delete selected entries" individual RFID cards are
deleted.
Transfer whitelist to other devices:
f Click on the "Settings" icon.
f In "Copy all entries" the whitelist is copied.
f Navigate to the same menu of the destination device
and click "Copy" to insert the whitelist.
f Alternatively, the whitelist can be copied via "Save
entries locally" and inserted in the same menu of the
destination device in "Paste local entries".
This also requires a network connection to the
destination device.
EN
19