Function Block - Eureka ATOM Manuel D'instructions

6.6.3 "ESPRESSO & BREW" DISPENSING MODE ACTIVATION
By pressing the keys (4)
To start dispensing:
• Press the key (4)

With the tank (16) inserted, the (14) button is not pressed.
Delivering through (4) button.
• Insert the filter holder until press the button (14); remove the filter holder to release the
button (14) to stop dispensing.
By pressing the buttons (3)
mode.
6.6.4 PARTIAL DOSE COUNTER ZEROING
From the dispensing programmed doses screen, long press the (4)
partial counters of doses delivered.
6.6.5

FUNCTION BLOCK

By pressing both keys (6)
display appear the icon (22)
Press again both keys (6)
6.6.6 APPLIANCE SWITCH ON WITH CONCEALED CONTENTS
Press the key (4)
• Appliance model
• Firmware version.
• 1 and 2 dose total counter (cannot be reset).
• Display brightness, adjustable with the keys (6)
Press the key (3)
12
the continuous mode is activated.
to start dispensing and press it again to stop dispensing.
or (5)
and (2)
.
and (2)
and switch on the appliance, to access the following screen:
or (5) to return to the dispensing dose screen.
.
the appliance returns to the relative dispensing
the time dispensing setting in locked. On the
to unlock the appliance functions.
and (2)
button to reset
.
EN