ITW Orbitalum GF 4 Traduction Du Mode D'emploi Original page 82

enGLISH
Set-up and assembly
8.6 Adjusting the pipe dimension
WARnInG!
8.6.1 Saw blade without additional cutter
1. Turn the slide with saw blade all the way down using the hand wheel (1).
ATTenTIOn!
2. Insert the pipe so that it almost reaches the saw blade (3) and tighten using the multifunctional wrench (4).
82
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Falling objects or tilting and bending
tubes!
Irreversible crushing.
X Wear safety shoes (in accordance with EN
ISO 20345, at least S1).
X Support pipes whose length exceeds 1 m
with a pipe support or a pipe feeder or
extension unit.
Damage to the pipe and saw blade!
A slide that is not positioned completely downwards can press the pipe against the saw
blade when tightened.
1
GF 4, GF 6, RA 8, RA 12 (AVM/MVM)
4
3
[REV. 20190510] OC_GF_RA_BA_790142765_00__INH-02_EN