Technical Data; Symbols And Their Meaning - Wolfcraft MASTER cut 2600 Traduction De La Notice D'utilisation Originale

INTRODUCTION
WARNING: Read all the safety information, instructions, illustrations and technical data that were supplied with
the MASTER cut 2600 and the power tools used. Failure to comply with the following instructions can lead to electric shock,
fire and/or serious injury.
Keep all safety information and instructions for future reference.
The term "power tool" used in the safety information refers to electric tools operated with mains power (with mains power cable).

TECHNICAL DATA

Dimensions when set up for use:
Dimensions when folded up:
Worktop dimensions:
Max. cut capacity at 0°:
Max. cut capacity at 45°:
Saw blade, tiltable:
Max. cutting width with parallel guide:
Max. workpiece dimensions:
Bore diameter of clamping holes:
Pattern of the clamping holes:
Maximum load:
Weight:

SYMBOLS AND THEIR MEANING

Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.
Dust mask must be worn.
Pull the plug.
General information
Do not use the machine for cutting
firewood.
Use only hand circular saws with
a maximum cutting depth
of 70 mm.
Use only saw blades with
a maximum diameter of 200 mm
for your hand circular saw.
t
1185 x 757 x 863 mm (width x depth x height)
1085 x 757 x 213 mm
1035 x 695 mm
circular bench saw 57 mm
circular bench saw 35 mm
0° to 45°
table saw 625 mm
600 x 400 x 65 mm (router table)
20 mm
128 / 128 mm (horizontal / vertical)
120 kg
24 kg
Set the cutting depth of your hand circular saw before every cut in such
a way that the saw blade does not protrude more than 4 mm from
the work piece.
Use only hand circular saws with a riving knife.
Use as a milling table only in conjunction with the parallel
milling guide (art. no. 6901000).
Use only machines with a maximum output of 2760 W.
Do not cut more than 5 mm into the worktop.
Do not sit on the table.
Do not stand on the table.
Do not apply weight to the table unevenly.
Do not apply a load of more than 120 kg to the table.
40