Important - SOLIS BARISTA PERFETTA PLUS 1170 Mode D'emploi

1. Setting the water quality on your MAVEA Intenza water cartridge
To make sure that the Original Intenza Aroma Ring is optimally adjusted, you can test
your water quality with the included test strip. Hold the test strip briefly into your tap
water, wait one minute and read your water quality from the test strip.
Now, set the ring on the bottom of the cartridge to the corresponding position
(letter A, B or C).
A: for regions with soft water
B: for regions with medium hard water
C: for regions with hard water (default setting)
2. Installing the water filter cartridge
Place the cartridge upside down in a jug of cold
●
water and gently squeeze the cartridge to remove
potential air bubbles.
Take the water tank off of the appliance and verti-
●
cally place the cartridge in the purpose-built bracket
on the inside of the tank. The Original INTENZA
Aroma Ring with the letters has to be on the bot-
tom side. To ensure best quality, make sure that the
cartridge is firmly inserted and that the seal is in the
correct position.
Fill the tank up to the Max-marking with cold tap
●
water. Place the lid on the tank.
Place the water tank back on the appliance.
●
IMPORTANT: When using a cartridge for the first time, each MAVEA Intenza wa-
ter filter cartridge has to be rinsed with 16.9 fl oz of water. To rinse the cartridge,
activate the automatic rinse program by adjusting the appliance to an inserted
water filter. Proceed as described in section "Adjusting the appliance / Water filter
programming" on page 17.
EN
15