SOLIS BARISTA PERFETTA PLUS 1170 Mode D'emploi page 24

Dispensing the coffee
EN
Rinse the brewing group for a few seconds by pressing one of the coffee buttons.
●
This will remove old coffee residues. Then, insert the portafilter into the brewing
group so that you align the handle of the portafilter with the "Insert" symbol,
lock the portafilter into place and turn the handle to the right until you feel a
resistance and the handle stands at approx. 90° to the machine, under "Lock".
Place one or two cups (preferably preheated) under the outlets of the portafilter.
As soon as the machine has reached the temperature for dispensing coffee,
●
the two coffee buttons
coffee buttons and the machine starts the process and automatically cancels the
dispensing process.
After each coffee brew
Carefully remove the portafilter from the brewing head. Use a knock-out bowl to
●
knock the coffee grounds out of the filter. Please do not pour the coffee grounds
down the drain, as this might clog the sewage pipes.
ATTENTION: The portafilter, filter and especially the coffee grounds are very hot!
Be very careful when removing it, you could scald yourself. Rinse the filter and the
portafilter carefully under running water. Dry both parts with a cloth.
Regularly check whether the drip tray is full and has to be emptied to prevent
●
overflow which could damage the underlying surface. The drip tray must be emp-
tied at the latest when the red float gauge between the drip grid becomes visible.
3 . PROGRAM M IN G TH E CO FF E E A MO U N T
FOR 1 C UP O R 2 C UP S
During the first coffee preparation, you can program the extraction volume for 1 cup
or 2 cups. Please proceed as follows:
Wait until both coffee buttons constantly light up white.
●
Press and hold the
●
the button pressed, coffee will run into the cup after a brief pre-brewing phase.
When the desired quantity has been dispensed, release the button, the coffee
dispensing stops, two signals sound and the dispensed quantity is saved. During
programming and coffee dispensing, the Prog. button and the coffee button you
have used flash. After dispensing, only the two coffee buttons light up constantly
and indicate that the machine is in operation mode.
The next time you prepare coffee with the same coffee button, just press the
●
coffee button briefly and the stored quantity will be brewed.
By changing type of coffee and/or amount of coffee powder, you may need to
●
re-adjust the volume.
ATTENTION:
The machine stops automatically after approx. 1 minute or after 10.1 fl oz of
●
coffee have been dispensed.
24
and constantly light up white. Press one of the
or button for at least 5 seconds. As long as you keep