Table des Matières
Publicité
4. Install the carburetor and tighten the joint
screws.
5. Install the securing plate. Match one of the
projections on the carburetor cap with one
of the indents on the securing plate.
cC
If the securing plate does not match a pro-
jection, tighten the carburetor cap until they
align. Do not loosen.
6. Tighten the securing plate screw to the
specified torque.
Tightening torque:
3.5 Nm (0.35 m0kg)
7. Connect the fuel hose and oil delivery hose.
8-43
Publicité
Table des Matières
