Declaration Of Conformity; Explication Of Warning Symbols - IKA ULTRA -TURRAX Tube Drive P control Mode D'emploi

Source language: German
Contents
1 Declaration of conformity
2 Explication of warning symbols
3 Safety instructions
4 Unpacking
5 Correct use
6 Useful facts
7 Interfaces and outputs
8 Commissioning
9 Switching on
10 Factory setting
10.1 Resetting parameters to factory setting (RESET)
11 Set menu parameters
11.1 Operation mode
11.2 Operation language
11.3 Maximum rotation speed (max rpm)
11.4 Maximum timer value (timer max)
12 Set working parameters
12.1 Target speed (target rpm)
12.2 Timer value (timer sec)
12.3 Reverse function (rev sec)
12.4 Turbo function
13 Error codes
14 Maintenance
15 Accessories
16 Warranty
17 Technical data
EN
1

Declaration of conformity

Seite
We declare under our sole responsibility that this product corro-
sponds to the regulations 2014/35/EU, 2006/42/EC, 2014/30/EU
16
and 2011/65/EU and conforms with the standards or standardized
16
documents EN 61010-1, EN 61010-2-051, EN 61326-1, EN 60529
and EN ISO 12100.
17
A copy of the complete EU Declaration of Conformity can be re-
18
quested at sales@ika.com.
18
19
2 Explanation of symbols
19
20
General hazard
20
21
This symbol identifies information that is of vital
21
DANGER
importance for safeguarding your health
22
and safety. Disregarding this information can
22
lead to health impairment and injuries.
22
This symbol identifies information that is of
23
WARNING
importance for the technically correct
23
functioning of the system. Disregarding this
24
information can result in damage to the device
24
or to system components.
24
24
Risk of hand injury.
DANGER
24
25
25
26
26
27
16