Ec Declaration Of Conformity - Evolution RAGE 4 Notice Originale

www.evolutionpowertools.com

EC DECLARATION OF CONFORMITY

In accordance with EN ISO 17050-1:2004
The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where applicable,
fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC.
Machinery Directive.
2014/30/EU. Electromagnetic Compatibility Directive.
2011/65/EU.
The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC as The Waste Electrical and Electronic Equipment (WEEE) Directive.
amended by
2003/108/EC .
And is in conformity with the applicable requirements of the following documents:
EN ISO 16093: 2017 • EN60204-1:2006/A1: 2009 • AfPS GS 2014:01 PAK
EN55014-1: 2006/A2:2011 • EN55014-2: 2015 • EN61000-3-2: 2014 • EN61000-3-3:2013
Product Details
Description: RAGE4 185mm (7-1/4") MULTIPURPOSE CHOP SAW
Evolution Model No: UK 230V: 081-0006, UK 110V: 081-0007, USA 120V: 081-0009,
EU 230V: 081-0008
Brand Name: EVOLUTION
Voltage: 230-240V / 110V / 120V ~ 50/60Hz
Input: 1250W
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities,
and verifies that our technical file contains the documents listed above and that they are the
correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
Print: Matthew Gavins - Group Chief Executive
03/03/16
19
EN