Erreka CICLÓN Manuel De L'installateur page 56

INSTALLATION
Position the opening and closing stopper
Option B: Operator with articulated arm
Attach the arm to the door
52
Installation Manual
1 Attach the opening stopper (1) to the support plate
(2) with the nut (3)-screw set (4).
2 Attach the closing stopper (in the opposite direction
to the opening stopper) to the support plate with
the screw-nut set.
1 In CL210F (T2000VFI), CLS210F models, unlock the
motor with the unlocking key, see section "Manual
operation" on page 42.
2 Close the door, extend the arm (1) to a maximum of
670 mm and mark the positions (A) and (B) of the
attachment bracket orifices (2).

Ensure the indicated distance is not exceeded,
see "Fig. 6 Example of assembly position for
operator with articulated arm".
3 Make the orifices in the door in the position marked.
4 Attach the support (2) to the door.

See the articulated arm instructions.