Roco FLEISCHMANN Z21 CAN HUB Mode D'emploi page 7

Overview
LED status
Lit up blue
LED Booster signal
Lit up white
Determination of use and function
To be able to extend your system further even if the 12V CAN supply on the Z21 is fully exploited, for
example if more than 20 Z21 Detectors
of the Z21.
In this way, the Z21 CAN HUB can also feed in the 12V bus supply or amplify the booster signal on the
Z-CAN OUT. Therefore a further 20 boosters and a further 45 Z21 Detectors can be connected to the CAN.
You can find further information on use and configuration on the homepage www.z21.eu in the 10804
– Z21 CAN HUB section.
At the time of print, Z21 DETECTOR 10808
1
At the time of print, Z21 single BOOSTER 10806 and Z21 dual BOOSTER 10807
2
Normal mode –
Device is supplied
Booster signal from the
control centre is available
or more than seven Z21 boosters
1
Z-CAN-
output
CAN output 1 - 3
CAN-input
are to be connected to the CAN
2
Z21 CAN HUB
7