WOLFF BITURBO-STRIPPER 230 V/ 50 Hz Traduction Du Mode D'emploi Original page 23

 In the event of the intended replacement of parts, the
intended equipment with accessories of the intended
other technical changes, advice should always be ob-
tained from an authorised Wolff service workshop or
from us as the manufacturer before commencing work.
 It is strongly recommend that only safety-approved
Original Wolff replacement parts and Original Wolff
accessories are used, which have been approved
by us as manufacturer. Replacement parts and
accessories can be obtained from your authorised
service Centre, which will also be able to undertake
professional installation on your behalf. Original
Wolff replacement parts and Original Wolff acces-
sories have been checked for safety and suitability
especially for Wolff machines.
Notes
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
We are unable to adequately assess the safety and
suitably of non-Original Wolff replacement parts.
 In order to preserve operational safety and to pre-
vent damage in the event of technical modificati-
ons, of whatsoever nature, our technical guidelines
must always be observed. We are also always
happy to hear from you should you have any other
questions about your Wolff machine.
Please note that we cannot accept any liability for
damage, insofar as this is sustained as the result of
incorrect work undertaken or as the result of violation
of the rules stated above.
EN
23