TLV SH Série Manuel D'utilisation page 2

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction
Before beginning installation or maintenance, please read this manual to ensure correct
usage of the product. Keep the manual in a safe place for future reference.
The inline repairable steam traps of the SH Series, with thermostatic air vent, are suitable
for applications with pressures up to 10 MPaG* (1500 psig), temperatures up to 425 °C (800 °F),
and under superheat conditions. The traps discharge condensate continuously and
automatically at a temperature slightly lower than saturation temperature.
1 MPa = 10.197 kg/cm
, 1 bar = 0.1 MPa
2
For products with special specifications or with options not included in this manual, contact
TLV for instructions.
The contents of this manual are subject to change without notice.
Einführung
Bitte lesen Sie die Betriebsanleitung vor Einbau und Inbetriebnahme sorgfältig durch und be-
wahren Sie sie für späteren Gebrauch an einem leicht zugänglichen Ort auf.
Die in der Leitung wartbaren Freischwimmer-Kondensatableiter der SH Serie, mit thermischem
Entlüfter, können für Betriebsdrücke bis 100 bar ü und Temperaturen bis 425 °C, auch im
überhitzten Bereich, eingesetzt werden. Sie leiten Kondensat automatisch und kontinuierlich mit
geringer Unterkühlung unter Sattdampftemperatur ab.
1 bar = 0,1 MPa
Wenden Sie sich an TLV für Sonderausführungen, die nicht in dieser Einbau- und Betriebs-
anleitung enthalten sind.
Wir behalten uns vor, den Inhalt dieser Betriebsanleitung ohne Ankündigung zu ändern.
Introduction
Veuillez lire attentivement ce manuel afin d'utiliser correctement le produit. Nous vous
recommandons de le garder dans un endroit sûr pour de futures consultations.
Les purgeurs de vapeur de la gamme SH sont réparables sans les démonter des tuyauteries,
et peuvent être utilisés sans réglage jusqu'à 100 bar et 425 °C, aussi sous des conditions
surchauffées. Ces modèles évacuent le condensât automatique à une température légèrement
inférieure à la température de saturation.
1 bar = 0,1 MPa
Pour tout produit aux spécifications particulières ou comportant des options non reprises dans ce
manuel, veuillez contacter TLV.
Le contenu de ce manuel est sujet à modifications sans préavis.
̶ 1 ̶

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sh3nlSh5nlSh6nlSh5nhSh6nhSh5vl

Table des Matières