General Safety Rules - Festool HL 850 E Notice D'utilisation D'origine

Planer
Technical data
Power
Speed (no load)
Plane width
Chip thickness
Max. rebate depth
Weight according to
EPTA-Procedure 01:2014
The specified illustrations can be found at the
beginning of the operating instructions.
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
Wear a protective mask!
Wear protective goggles.
Wear protective gloves.
Disconnect from the power supply!
Safety class II
Not to be included in municipal refuse
CE marking: Confirms the conformity of the
power tool with the European Community
directives.
1 Intended use
The tool together with the available Festool ac-
cessories is designed for processing wood, soft
plastics and similar materials.
Usage permitted only with planer heads designed
for maximum speed of 15000 rpm.
The user is liable for damage and injury
resulting from incorrect usage!
2
2.1
850 W
WARNING!
12000 rpm
instructions, illustrations and specifications
82 mm
provided with this power tool. Failure to follow
0 - 3.5 mm
all instructions listed below may result in electric
unlimited
shock, fire and/or serious injury.
Save all warnings and instructions for future
3.9 kg
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2
- Wait for the cutter to stop before setting the
tool down. An exposed rotating cutter may
engage the surface leading to possible loss of
control and serious injury.
- Hold the power tool by insulated gripping sur-
faces, because the cutter may contact its own
cord. Cutting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
- Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the workpiece by your hand or against
the body leaves it unstable and may lead to loss
of control.
- Festool electric power tools should only be
installed in work benches specially designed
by Festool. The electric power tool may become
unsafe and cause serious accident if installed
in benches from other manufacturers or self-
manufactured work benches.
- Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
- Wear suitable personal protection equipment:
- Only for AS/NZS: The tool shall always be sup-
plied via residual current device with a rated
residual current of 30 mA or less.
11
Safety instructions

General Safety Rules

Read all safety warnings,
Tool-specifi c safety rules
Ear protection to reduce the risk
of damaging your hearing; Protec-
tive goggles; Face mask to reduce
the risk of inhaling harmful dust;
Protective gloves when handling
tools and coarse materials.