General Safety Instructions; Machine-Related Safety Instructions; Emission Levels - Festool CARVEX PS 420 EBQ Notice D'utilisation D'origine

C A R V E X
GB
5 Safety instructions
5.1

General safety instructions

WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
– Festool electric power tools must only
be installed on work tables provided by
Festool for this purpose. If the tool is in-
stalled in another, or self-made, work table,
it can become unstable and result in serious
accidents.
– Wait until the power tool stops com-
pletely until placing it down. The tool can
become entangled and lead to a loss of con-
trol of the power tool.
– Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
– Always place the pendulum jigsaw on the
workpiece with the saw blade running.
– Wear suitable protection such as ear protec-
tion, safety goggles, a dust mask for work
which generates dust, and protective gloves
when working with raw materials and when
changing tools.
– Always secure the workpiece in such a man-
ner that it cannot move while being sawed.
– Always connect the machine to a dust ex-
tractor when work involves dust generation.
– Check the plug and the cable regularly and
should either become damaged, have them
replaced by an authorised after-sales ser-
vice workshop.
14
All manuals and user guides at all-guides.com
– Stroboscopic light can cause epileptic
– Do not look into the stroboscope light. Look-
5.3
– Pre-connect a residual current circuit-break-
– Connect the machine to a suitable dust ex-
– Clean tool regularly of dust accumulations in
5.4
Levels determined in accordance with EN
60745 are typically:
Sound pressure level
Noise level
Measuring uncertainty
allowance
Operating noise
Damage to hearing
Vibration emission value a
three directions) and uncertainty K measured
in accordance with EN 60745:
Sawing wood
Handle
Gear
head
Sawing metal
Handle
Gear
head
seizures. Do not use this machine if you are
susceptible to epileptic seizures.
ing into the light source can damage your vi-
sion.
Metalworking
The following precautions are to be tak-
en when processing metals for safety
reasons:
er (FI, PRCD).
tractor.
the motor housing.
Wear protective goggles.

Emission levels

CAUTION
Use ear protection!
PS 420 EBQ
a =6,0 m/s
h
K = 2,0 m/s
a =11,0 m/s
h
K = 2,0 m/s
a =7,0 m/s
h
K = 2,0 m/s
a =12,0 m/s
h
K = 2,0 m/s
L = 88 dB(A)
PA
L = 99 dB(A)
WA
K = 3 dB
(vector sum for
h
PSB 420 EBQ
2 2
a =10,0 m/s
h
2 2
K = 2,0 m/s
2
2
2 2
a =11,0 m/s
h
2 2
K = 2,0 m/s
2
2