Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TI 15
GB
Original operating manual
1
Safety instructions
1.1
General safety instructions
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1.2
Machine-related safety instructions
– Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fastener may contact hidden wiring. Cutting acces-
sory or fasteners contacting a "live" wire may make exposed metal parts of the pow-
er tool "live" and could give the operator an electric shock.
– This charger can be used by children of 8 years and upwards and persons with im-
paired physical, sensory or mental abilities, or insufficient experience or knowl-
edge, providing they are supervised or have been instructed in the proper use of the
appliance and understand the risks involved. Children are not permitted to play with
the appliance. Children must not carry out cleaning tasks or maintenance unless
they are supervised.
– Wear suitable protection: such as ear protection, safety goggles, a dust mask for
work which generates dust, and protective gloves when working with raw materials
and when changing tools.
CAUTION! Rebound!
Rotation: Switch off device immediately!
– Do not lock the on/off switch permanently!
– Do not open the battery pack or the charger!
– Prevent metal parts (e.g. metal chips) or fluids from entering the charger!
– Do not use battery packs or chargers from other manufacturers!
– Protect the battery pack from excessive heat or constant heat sources such as sun-
light or naked flames!
– Never use water to extinguish burning li-ion battery packs! Use sand or a fire blan-
ket.
– Check the plug and the cable regularly and should either become damaged, in order
to avoid a hazard, have them replaced by an authorised after-sales service workshop.
– Always pull the mains plug out of the socket when the charger is not in use.
– Only for AS/NZS: The tool shall always be supplied via residual current device with
a rated residual current of 30 mA or less.
12
Publicité
Table des Matières
