HumanTechnik lisa Mode D'emploi page 10

lisa-Radio-
Converter 1
Important: lisa radio converter 1 :
"Transmit with delay" is pressed
lisa radio converter 2 :
:"Transmit with delay" is not pressed
Channel selection
A digital transmission system
ensures the correct recognition
of each of the digital signals
from each transmitter. The
system has 10 different selec-
table channels, 0-9. The factory
setting for all lisa devices is
channel 0. Only where more
than one installation is required
in the same building will it be
necessary to select a different
channel for each system.
10 English
Maximum transmission range
lisa-Radio-
Converter 2
To select a channel, turn the
rotary switch on the undersi-
de of the transmitter to the
required channel number
using a small screwdriver.
Example:
Set channel
number 0