HumanTechnik lisa Mode D'emploi page 9

Congratulations on purchasing
your lisa Radio Converter:
We hope that it will serve you
well for many years to come.
You have opted for a modern
and reliable system.
Please read through these
operating instructions carefully.
They tell you how to set up the
system correctly and explain all
the system's features to you.
Functional principle
With the lisa Radio Conver-
ter, lisa systems operating
through the 230 V power sup-
ply can be combined with the
radio receivers. The lisa
Radio Converter receives the
signals from various lisa trans-
mitters and sends them to the
cable-free radio receivers. All
lisa transmitters (acoustic/gal-
vanic telephone transmitters,
acoustic/galvanic door bell
transmitters, baby phones,
alarm transmitters) can be used
as transmitters.
Operating and display ele-
ments
- Person call button
- Display LEDs
- Channel selection switch
- Connection socket for
vibration cushion
- Transmit with delay (this
operating element is only
important if two lisa radio
converters are used).
Note 1
The person call button located
on the converter does not have
any function for 60 seconds if
an alarm signal/person call sig-
nal has been sent.
Note 2
If the "Transmit with delay"
switch is on position 1
(pressed in) the radio signals
are sent with a delay of 1.5
seconds.
Relay function – operation
with two lisa Radio
Converters
If the radio transmission range
of a lisa Radio Converter is
not sufficient (e.g. in large
houses), you can incorporate a
second isa Radio Converter
into the system.
English 9