Belkin Bitronics AutoSwitch Guide De L'utilisateur page 23

P73121/F1U126-KIT/EU/man.qxd
Using the Bitronics Software
EXAMPLE: Sharing One Printer and a Zip
storage device)
When dealing with a mass storage device (devices that add a drive letter to
your system like E:) such as a Zip
tray must be configured so that the Bitronics switch is defaulted to the Port
attached to the Zip
connected to the Zip
always be connected, and not receive error messages:
1. Make sure that the port that connects to the Zip
"Mass Storage Device" in "Settings". See above for more info. The
image below shows the Zip
the device type is "Mass Storage Device". Type anything you want
in "Display Name". Click "OK" when finished.
4/28/00 1:06 PM
® Drive, the Bitronics Software in the system
® Drive. It is necessary for the switch to always remain
Drive so that any time you access that drive, you will
®
® Drive is connected to Port A, and that
19
Page 19
(continued)
® Drive (or any other mass
® Drive is set to
En