Belkin Bitronics AutoSwitch Guide De L'utilisateur page 26

P73121/F1U126-KIT/EU/man.qxd
Using the Bitronics Software
Removing and Adding the Bitronics Switch Icon from the
System Tray
• To remove the icon, simply right click on it, and answer "Yes" to
the prompt.
• To reload the icon back into the system tray, click on "Start", select
"Programs", select "Belkin Bitronics Switch", and select
"AutoSwitch-Multi PCs".
ADVANCED USER TIP:
If you are using devices with pass-through ports (like Zip
scanners), you can connect a printer to the pass-through port and use the
other device port on the Bitronics switch to connect to another device. Just be
sure that the printer driver has its Port set to the correct device port. For
example, if you wish to use 2 printers, 1 Zip
Zip ® Drive to Port A, the Scanner to Port B, the first printer to the pass-
through of the Zip
scanner. In the Bitronics software, set "Port A" to "Mass Storage Device", and
"Port B" to "Scanner". Then in the "Printer Properties/details", set the "Print
to the following Port" to "LPx1- PA (auto switch)" for the first printer, and
"LPx1- PB (auto switch)" for the second printer. In general, only printers can
be connected to pass-through ports.
4/28/00 1:06 PM
Drive, and the second printer to the pass-through of the
®
22
Page 22
(continued)
® Drives and
Drive and 1 scanner, connect the
®