Belkin Bitronics AutoSwitch Guide De L'utilisateur page 17

P73121/F1U126-KIT/EU/man.qxd
Windows
Click on the "Details" tab. In the pull-down menu "Print to the following port:",
select the correct port this printer is connected to on the Bitronics switch:
• LPx1 – PA (autoswitch) – Select this if the printer is connected to
Port A of the Bitronics switch.
• LPx1 – PB (autoswitch) – Select this if the printer is connected to
Port B of the Bitronics switch. The same occurs for Ports C and D.
In the image above, the printer is connected to Port B of the Bitronics
switch. Therefore, LPx1 – PB (autoswitch) is selected. When finished,
click "OK".
4/28/00 1:06 PM
95 / 98 and NT
®
13
Page 13
®
(continued)
En