MRA 4025066159949 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
4 Oval head screws, M5 x 16 mm
2 Oval head screws, M5 x 35 mm
6 Washers, 13 x 6 x 0.5 mm
2 Brackets
2 Rubber nuts, M5
2 Bushings, 15 mm
2 O-rings, 4.5 x 1.5 mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Remove the screws from the original screen (P1).
3. Hold the upper screws in place using the second Allen key (P2).
4. Fasten the metal brackets to the upper fastening points using the M5 x 16 mm screws, and
insert the rubber nuts (P3 + P4).
5. Insert the M5 x 35 mm oval head screws and plastic washers included through the lower
holes in your MRA screen. After that, place the 15 mm bushings and O-rings onto the screws
from inside (P5).
6. Twist each metal bracket until the open side faces inward (P4).
7. Position the MRA screen on your motorbike, then fasten it with the M5 x 16 screws and
plastic washers on the upper part and the screws you have already mounted on the lower
part.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Triumph Tiger 1050 Sport 16-
Article No..
--- Allen key, 3 mm
10554 Allen key, 5 mm (2 pcs)
10632
10669
10671
10629
10636
10992
2
Required tools