Safety; Intended Use; Incorrect Use; Safety Information - Stiebel Eltron AUK 7 Utilisation Et Installation

OPERATION

SAFETY

2. Safety
This appliance is designed for internal installation.
!
However, it must never be installed in wet areas.
2.1

Intended use

This appliance is designed to heat living areas.
Any other use beyond that described shall be deemed inappropriate.
Observation of these instructions is also part of the correct use of
this appliance. Any modifications or conversions to the appliance
void all warranty rights.
2.2

Incorrect use

Never use the appliance in rooms exposed to oil vapours, such
as workshops.
Never sit or stand on the appliance.
2.3

Safety information

DANGER Risk of fire
Never operate this appliance ...
— if the minimum clearances to adjacent objects
are not maintained (for minimum clearances see
chapter "Installation location").
— if an appliance component is damaged, the
appliance has fallen over or already had a fault.
DANGER Risk of fire
Never place any flammable objects on top of the
appliance.
Untrained personnel must only carry out simple maintenance
tasks, such as cleaning the filter mat.
WARNING Risk of injury
The appliance may be used by children aged 8 and up
and persons with reduced physical, sensory or mental
capabilities or a lack of experience and know-how,
provided that they are supervised or they have been
instructed on how to use the appliance safely and have
understood the resulting risks. Children must never
play with the appliance. Children must never clean the
appliance or perform user maintenance unless they are
supervised.
Never insert any objects into the air inlet and outlet apertures.
2.4

CE designation

The CE designation shows that the appliance meets all essential
requirements:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.5

Test symbols

See type plate on the appliance. See chapter "What to do if ..."
24 |AUK
287974-38519-9032.indb 24
3.

Appliance description

The appliance is a fan convector designed for wall mounting. A
heat exchanger draws heat from the heating circuit and transfers
it to the ambient air. The appliance operates with lower flow
temperatures than conventional radiators.
Air is drawn into the lower area at the front of the appliance.
Inside the appliance, the air is heated by the heat exchanger.
Once heated, the air is blown out forwards and diagonally at the
top of the appliance.
The fan constantly circulates the room air and ensures a pleasant
temperature distribution in the room. The integral filter cleans the
room air. The air volume transported by the fan can be selected
in three stages.
For reasons of comfort, the fan only switches ON at flow
temperatures above 25°C to prevent cold air from being blown
into the room. If the flow temperature drops below 18°C, the fan
switches OFF.
The maximum flow temperature must not exceed 55 °C.
4. Operation
4.1

Controls

1

1 Temperature selector

2 Fan stage selector
3 ON/OFF switch
Two rotary selectors are located at the top right of the appliance.
With these, you can select the room temperature and the fan
speed as required.
Use the ON/OFF switch to turn the appliance ON and OFF.
4.1.1 Temperature selector
You can adjust the room temperature with the temperature
selector on the left. Adjustments are made as with a thermostatic
valve on a conventional radiator.
2
3
WWW.STIEBEL-ELTRON.COM
19.02.2015 12:05:14