C. Remove mortise lock, clean and re-insert
Fig. 24
With emergency
opening log, lead con-
necting cable into the
inside of the lock pock-
et and out via the hole
that has been cut.
Pay attention to cable routing when inserting the connecting cable!
Do not crush cable! (Fig. 25)
Insert mortise lock as described in "A. Insert mortise lock" on page 47.
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
Remove mortise lock.
Outside of door is already drilled and cut.
Before continuing, remove debris
and clean lock pocket.
Fig. 25
Installation Instructions
Door leaf
Connector
Depth cutting
Connection cable
Mortise lock
Lock pocket
53