A.
Insert mortise lock
Risk of the cable being crushed by mortise lock with emergency
opening log!
1.
Insert mortise lock.
Fig. 9
correct
Fig. 11
2.
Screw in the mortise lock.
With mortise lock with emergency opening log, the mortise lock con-
necting cable must be fixed in position as shown in fig. 11.
3.
Check position of mortise lock using a locking cylinder. The locking cyl-
inder must be easy to insert. If necessary, increase size of lock pocket
or clear the locking cylinder access route.
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
incorrect
Fig. 10
cable
Fig. 12
Installation Instructions
cable
Hooded
screw
47