Only required with emergency opening log!
Fig. 22
Drilling jig parts A-C
Fig. 23
52
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
Drill through to the middle of the door
leaf from both sides using the 8 mm
drill bit to connect the emergency
opening log. (Centring hole for 32 mm
router cutter)
A
Depth cutting as far as lock pocket.
Page 49, fig. 15, section A-A.
Installation Instructions
This procedure can
destroy the connecting
cable for emergency
opening log. The con-
necting cable must not
be routed in the lock
pocket at location A,
fig. 22!
Remove mortise lock
from lock pocket!