Paging Call; How To Initiate A Paging Call; How To Answer A Paging Call; Self-Ignition Function - Comelit HFX-7000M Manuel Technique

5.2 PAGING CALL

5.2.1 How to initiate a paging call

„ Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 4
monitors).
1
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.

5.3 SELF-IGNITION FUNCTION

√ Self-ignition is possible only when the system is in standby
„ Press the self-ignition button (
monitor the video from the external unit.
5.3.1 How to display on the monitor the image
transmitted from the CCTV camera
√ During "call in progress" or during Self-ignition.
„ Press the programmed button to display on the monitor the
image transmitted from the CCTV camera.
36
by default) to display on the
MAIN EXTERNAL
UNIT
CCTV
CAMERA

5.2.2 How to answer a paging call

„ Press to answer the paging call
» a (300 seconds) point to point conversation between the
two monitor is estabilished.
» the paging call will be terminated for the other devices.
„ Press again to cycle through several cameras
If a call is underway with an external unit it is NOT possible
to cycle between the external units
MAIN UNIT 1
UNIT
„ Press again to cycle through several cameras and come
back to the external unit
MAIN
UNIT
CAMERA 1
2
cycle
UNIT 2 UNIT 3
cycle
CAMERA 2 CAMERA 3