Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
1. Choose the function: refer to the the following table and select a S2 DIP switches combination
in which the self ignition function (AI) is listed for the keys you wish to program.
DIP S2
DIP 1
DIP 2
0
0
1
0
0
1
0
1
1
1
2. Addressing:
„ for self-ignition function don't set S1 DIP switches
3
Select the key to be associated with the function
„ Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4
Exit programming mode
„ To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the privacy LED switches off
5
When programming is complete,
„ Set S2 DIP switches 1-2-3-4 to the combination 1111 (PROG setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
referred to on line 0000 (see the table above).
„ Restore the user code setting on S1, see
4.2.3.5 HOW TO PROGRAM THE DOCTOR FUNCTION
√
Take note of the S1 setting and restore it when programming is complete
1
Enter programming mode
„ Set S2 DIP switch 5-6 to the combination 01
» the privacy LED flashes
2
1. Choose the function: refer to the the following table and select a S2 DIP switches combination
in which the doctor function (D) is listed for the keys you wish to program.
DIP S2
DIP 1
DIP 2
0
1
1
1
2. Addressing:
„ for doctor function don't set S1 DIP switches
3
Select the key to be associated with the function
„ Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4
Exit programming mode
„ To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the privacy LED switches off
5
When programming is complete,
„ Set S2 DIP switches 1-2-3-4 to the combination 1111 (PROG setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
referred to on line 0000 (see the table above).
„ Restore the user code setting on S1, see
26
DIP 3
DIP 4
0
0
0
0
0
0
1
0
1
1
"TAB. A User code" on page 30.
DIP 3
DIP 4
1
0
1
1
"TAB. A User code" on page 30.
KEY PROGRAMMING
P1
P2
AI
AI
AI
AI
PROG
KEY PROGRAMMING
P1
P2
D
PROG
Example
For P1= self-ignition function
Example
For P2=doctor function
Publicité
Chapitres
Table des Matières
