How To Change The Nameplate Of The External Unit Art. Ex-Dsm - Comelit HFX-7000M Manuel Technique

For instructions on changing the nameplate of the external unit, see the next section.
Before fixing the screw, make sure that you do not need to programme the external unit (see page
DSM" ) and make sure that the metal front panel does not rub against other metal parts, with consequent risk of damage to its
insulating coating.
CAUTION! To ensure that the product remains water-tight: make sure that the fixing procedure is carried out correctly
1
1
1
FIX
CORRECTLY!
6
2

3.3.1 How to change the nameplate of the external unit Art. EX-DSM

Labels must be made of non-conductive material so as not to compromise the operation of the Capacitive-touch buttons.
It is possible download the free software (Art. 1235A) from the website www.comelitgroup.com to print the entrance panel
name tags, using the adhesive pre-cut sheets available in our catalogue
NAMEPLATE AVAILABLE
2
3
22
1
7
1
1
4
CLOCKWISE
TIGHTEN
WELL
2
REMOVE
2
28 "4.6 Configuration EX-
JOHN SMITH
CHECK CORRECT
ORIENTATION
BEFORE GLUING
PETER WHIT
THE NAMEPLATE