SKYLOTEC ENTER ROLL A Instructions D'utilisation page 17

SKYLOTEC is not responsible for the consequences of direct,
indirect, accidental or any other type of damage resulting from the
use of its products.
5.) Identification and warranty certificate
The information on the applied labels correspond to those of the
supplied product (see serial number). The preprinted table reflects
the status of certification / standardization on the instruction date.
Binding are the information noted on the product.
a. Productname
b. Item no
c. Size /length
d. Material
e. Series no.
f. Month and year of manufacture
g. 1-x Standard(s) (international)
h. 1-x Certification no.
i. 1-x Testing institute
j. 1-x Certification date
k. 1-x Max. persons
l. 1-x Test weight/test load
m. 1-x Max. load
n. Production control system; Quality management system
o. Source declaration of conformity
You can get the full declaration of conformity by clicking on this link:
www.skylotec.com/downloads
6.) Control card
6.1–6.5) To be completed for audit
6.1) Date
6.2) Tester
6.3) Reason
6.4) Remark
6.5) Next inspection
7.) Individual information
7.1–7.4) Completed by purchaser
7.1) Date of purchase
7.2) First use
7.3) User
7.4) Company
8.) List of Notified Bodies (NB)
17 17