Standard Settings - Stiebel Eltron SHZ 30 LCD Notice D'utilisation Et De Montage

1.6 Standard settings

Standard display
LCD display Button Note
Achievable mixed water quantity is directly dependent on the
storage volume and the preset setpoint temperature! Indicated
mixed water quantity from 40 °C (in relation to a cold water
temperature of 15 °).
After each operation, the unit switches automatically to the
standard display.
: currently available quantity
of mixed wate
e.g. 159 litres
: currently available quantity
of mixed water less than
10 litres (lowest possible
indication)
: mixed water quantity
: heating element symbol
Rapid heating
LCD display Button Note
Setpoint temperature adjustment
LCD display Button Note
°
Switching off the water heating *
LCD display Button Note
°
* For switching on see setpoint temperature setting
(higher than 20 °C)
Directly from the standard
display if actual temperature is
less than setpoint temperature
: Heating-up.
: No heating-up.
Directly from the standard display
Range of adjustment 20 - 85 °C
Directly from the standard display
Setpoint temperature setting less
than 20 °C
Heating element symbol is
extinguished
Frost protection active
17