Gas Burners - Elba P60 Série Mode D'emploi

2
2
HOW TO USE THE COOKER TOP

GAS BURNERS

Gas flow to the burners is adjusted by
turning the knobs (illustrated in figs. 2.1a
- 2.1b) which control the valves.
Turning the knob so that the indicator
line points to the symbols printed on the
panel achieves the following functions:
– full circle
– symbol or
– symbol
To reduce the gas flow to minimum,
rotate the knob further anti-clockwise
to point the indicator towards the small
flame symbol.
The maximum aperture position per-
mits rapid boiling of liquids, whereas
the minimum aperture position allows
slower warming of food or maintaining
boiling conditions of liquids.
Other intermediate operating adjust-
ments can be achieved by positioning
the indicator between the maximum
and minimum aperture positions, and
never between the maximum aperture
and closed positions.
Fig. 2.1a
8
= closed valve
= maximum
aperture or flow
= minimum
aperture or flow
LIGHTING GAS BURNERS
Models without electric ignition
To light one of the gas burners, hold a
flame (e.g. a match) close to the top part
of the burner, push in and turn the
relative knob in an anti-clockwise
direction (fig. 2.3), pointing the knob
indicator towards the large flame symbol
(i.e. max. gas flow).
Models fitted with electric spark
lighter button
On these cooker tops, to light one of the
burners you have to push in and turn the
relative knob to the maximum aperture
position (large flame symbol
press the electric lighter button (fig. 2.2)
until the flame has been lit.
Adjust the gas valve to the desired posi-
tion.
Fig. 2.1b
) and