Elba P60 Série Mode D'emploi page 15

BURNERS AND GRIDS
These parts can be removed and
cleaned with appropriate products.
After cleaning, the burners and their
flame spreaders must be well dried
and correctly replaced.
It is very important to check that the
burner flame spreader and the cap
have been correctly positioned.
Failure to do so can cause serious
problems.
In the models with safety device,
check that the probe next to each
burner is always clean to ensure cor-
rect operation of the safety valves.
In appliances with electric ignition
keep the electrode clean so that the
sparks always strike.
Note: To avoid damage to the elec-
tric ignition do not use it when the
burners are not in place.
C
F
Fig. 3.1
CORRECT REPLACEMENT
OF THE BURNERS
It is very important to check that the
burner flame spreader "F" and the cap
"C" have been correctly positioned (see
figs. 3.1 and 3.2 ).
Failure to do so can cause serious
problems.
In appliances with electric ignition, check
that the electrode "S" (fig. 3.1) is always
clean to ensure trouble-free sparking.
In the models with safety device, check
that the probe "T" (fig. 3.1) next to each
burner is always clean to ensure correct
operation of the safety valves.
Both the probe and ignition plug must
be very carefully cleaned.
T
S
Fig. 3.2
15