Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FASTENING THE
INSTALLATION BRACKETS
(figs. 4.6, 4.7, 4.8)
Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
Turn the cooker top upside down and
fasten the brackets "F and R" to the
appropriate socket holes, without tight-
ening the screws "B" for the moment.
Make sure that the brackets are fas-
tened as shown in figure 4.6.
R
D
Fig. 4.7
20
COOKING HOBS - P60 series
C
B
R
FASTENING THE COOKER
TOP
(figs. 4.7 and 4.8)
Spread the sealing material "C" out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.
Insert the cooker top into the hole and
position it correctly.
Adjust the position of the brackets "F
and R" and tighten screws "B" to
block the cooker top firmly in position.
With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
Fig. 4.6
R
F
F
C
D
B
F
Fig. 4.8
Publicité
Table des Matières
