Elba P60 Série Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FASTENING THE
INSTALLATION BRACKETS
(fig. 4.9)
Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
Turn the cooker top upside down and
fasten the brackets "A" to the appropri-
ate socket holes, without tightening the
screws "B" for the moment.
Make sure that the brackets are fas-
tened as shown in figure 4.9.
A
B
Fig. 4.10
COOKING HOBS - P90 series
Fig. 4.9
A
C
A
FASTENING THE COOKER
TOP
(fig. 4.10)
Spread the sealing material "C" out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.
Insert the cooker top into the hole and
position it correctly.
Adjust the position of the brackets "A"
and tighten screws "B" to block the
cooker top firmly in position.
With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
A
A
A
A
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P90 série

Table des Matières