Description Of Symbols - Triton T12OT Instructions D'utilisation Et Consignes De Sécurité

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
WARNING: Moving parts can cause crush and cut injuries
Indoors use only (battery charger)
Class II construction (double insulated for additional protection)
T3.15A
Internal time-lag fuse with rated current 3.15A.
DO NOT incinerate batteries!
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products and batteries, including Li-Ion batteries, should not be
disposed of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Technical Abbreviations Key
V Volts
~, AC Alternating current
GB
A, mA Ampere
Ah
Amp hours (battery capacity)
n
No load speed
0
n Rated speed
opm Orbits or oscillations per minute
° Degrees
4
Original Instructions
Hz Hertz
,DC Direct current
W, kW Watt, kilowatt
/min or min
-1 Operations per minute
rpm
Revolutions per minute
dB(A) Decibel sound level (A
weighted)
m/s 2 Metres per second squared
(vibration magnitude)
Ø Diameter
Specification
Oscillating Tool
Model number:
Voltage:
No load speed:
Oscillation arc range:
Dimensions (L x W x H):
Weight:
Battery
Technology:
Voltage:
Model & Capacity:
Battery Charger
Model:
Charger type:
Charging time:
Input Voltage:
Output Voltage:
Protection class:
*Note: The optional high capacity 3.0Ah battery (T12HCB) requires approximately 2 hours
for a full charge
• Batteries supplied will vary depending on pack configuration
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration a :
h
Uncertainty:
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
T12OT
12V, DC
6000-16,000min -1
2.8°
280 x 50 x 65mm
1.15 kg (with battery)
Li-Ion
12V, DC
T12B: 1.5Ah
T12HCB: 3.0Ah (optional)
T12BC
Intelligent
1 hour - 100% charge (1.5Ah)*
½ hour - 80% charge (1.5Ah)
220-240V, AC 50/60Hz, 60W
12V, DC, 1500mA
83.0dB(A)
94.0dB(A)
3dB
12.73m/s 2
1.5m/s 2