Ce Declaration Of Conformity - Triton T12OT Instructions D'utilisation Et Consignes De Sécurité

Sanding sheets come loose from sanding pad in use
Unknown mechanical noise
Burning smell or other abnormal operation
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for information
on future releases. Details provided will not be made available to any third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: T12OT Retain your receipt as proof of purchase

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Triton Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: 103691
Description: Oscillating Multi-Tool 12V
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• EN60745-1
• EN60745-2-1
• EN60745-2-2
• EN60335-1
• EN60335-2-29
Speed set too high
Too much downward pressure in use
Hook and loop fastenings worn on pad
Accessory not securely fitted
Tool fault
Tool fault
Triton Precision Power Tools guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 3 YEARS from the
date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and
tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
t pr
ar
Terms & conditions apply.
This does not affect your statutory rights
Notified body: TÜV Rheinland Co., Ltd
The technical documentation is kept by: Triton Tools
Date:
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ, United Kingdom.
Reduce speed
Reduce hand pressure
Replace sanding pad
Check blade or other accessory is securely tightened
Stop using the tool and contact your dealer or authorised
Triton service centre
Stop using the tool immediately and contact your dealer or
authorised Triton service centre
oves to be defecti
XX/XX/XXXX
GB
9