Aqua Medic multi reactor S Mode D'emploi page 7

In order to prevent cloudiness caused by some filter materials, such as activated carbon or phosphate remover,
simply rinse them with water prior to use with the multi reactors. The pump needs to be cleaned as required.
To do this, open the pump and clean the individual components.
Note: Low water level in the filter sump may lead to dry running and thereby overheating of the pump. If the
pump is sucking in air, it could result in salt or calcium deposits inside the impeller housing which results in
pump failure.
3. Warranty
Should any defect in materials or workmanship be found within 24 months of the date of purchase, AB Aqua
Medic undertakes to repair, or at our option replace, the defective part free of charge – always provided the
product has been installed correctly, is used for the purpose that was intended by us, is used in accordance with
the operating instructions and is returned to us carriage paid. Proof of Purchase is required by presentation of
the original invoice or receipt indicating the dealer's name, the model number and date of purchase, or a
Guarantee Card if appropriate. This warranty may not apply if any model or production number has been altered,
deleted or removed, unauthorised persons or organisations have executed repairs, modifications or alterations,
or damage is caused by accident, misuse or neglect. We regret we are unable to accept any liability for any
consequential loss. Please note that the product is not defective under the terms of this Warranty where the
product, or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used. These statements do not affect your statutory rights as a customer.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 01/2019
7