Caller Id Service; Using As A Caller Id Telephone; When You Receive A Call - Sony ID Telephone SPP-ID200 Mode D'emploi

Caller ID service

Caller ID allows the caller's
phone number to be shown on
the display before you answer
the call. In order to use this
feature, you must first
subscribe to Caller ID service
with your telephone company.
The name of this service may
vary depending on your
telephone company.
Before using this feature, please
make sure you have properly
entered your area code as
explained on page 16.
!
If the RING ON/BATT SAVE
switch of the handset is set to
BATT SAVE (see page 15), a
caller's name or phone number
will not appear on the display.
To show it on the display, press
CALLER ID when receiving a
call.
!
During a power interruption, this
service will not be offered.
Important notes
The caller's name or phone number will not be displayed in the following cases:
• The call is made through a telephone company which does not offer Caller ID service (including
international calls). In this case, "OUT OF AREA" will be displayed.
• If the call was "blocked". For privacy reasons, many states allow callers the option to prevent his or
her telephone data from being displayed on the other party's Caller ID display. If you receive a call
which was "blocked" in this way, "PRIVATE" will be shown on the display.
• If the call is from an office which uses multiple lines, the phone number displayed may not match the
number you use to call the extension.
24

Using as a Caller ID telephone

NAME,TEL (1)
button
? (4) key
p When you receive a call
The phone number appears on the display.
You received a call from the number 201-391-6111.
If your Caller ID service includes caller name service, the caller's
name appears on the display.
You received a call from John Smith.
To alternate between the caller's name and phone number
indication, press NAME,TEL (1).
CALLER ID button
TIME/DAY (3)
button
/ (6) key
SPP-ID200(EF) 3-810-886-21(1)