Operating The Phone; Making And Receiving Calls; Making Calls; Receiving Calls - Sony ID Telephone SPP-ID200 Mode D'emploi

Making and receiving calls

TALK/DIAL
button

Making calls

!
If reception is poor when you
press TALK/DIAL, you will hear
five short error beeps ("OUT OF
RANGE" will also appear on the
display). In this case, move closer
to the base unit to improve
reception.
!
If reception becomes poor during
conversation, you will hear a
beep (the out-of-range alarm)
every second. If this happens,
move closer to the base unit;
otherwise, the call will be
disconnected after 15 seconds.
Note, however, that you may not
hear beeps if it is noisy on the
handset.

Receiving calls

!
The handset will not ring on an
incoming call ("**RINGING**"
will not appear on the display,
either) if the RING ON/BATT
SAVE switch is set to BATT
SAVE. However, you can receive
calls by pressing TALK/DIAL.
1
Press TALK/DIAL.
"CONNECTING" flashes on the display, and then you
hear a dial tone.
The talk time appears on the display.
2
Dial the phone number.
3
When you finish talking, press OFF.
The talk time disappears from the display.
Receiving calls on the handset is easy: just press TALK/DIAL.
1
When you hear the phone ring (at the same
time, "**RINGING**" appears on the display),
press TALK/DIAL.
The talk time appears on the display.
2
When you finish talking, press OFF.
The talk time disappears from the display.

Operating the phone

OFF button
Making and receiving calls
SPP-ID200(EF) 3-810-886-21(1)
17